• What to watch next

    00:06:39
    208 Views . 06 Nov 2019
    00:07:38
    203 Views . 06 Nov 2019
    00:19:57
    199 Views . 06 Nov 2019
    00:10:58
  • Videos  

    • 00:18:58
      Using the 5D Tactical Router Jig Pro
      87 Views . 22 Nov 2019

      Our 5D Tactical video will show you what comes with the 5D Tactical Multiplatform jig and how to use it. 

      We have an article that we put the 80 Percent Arms Jig against the 5D Tactical Jig. Visit that article at https://trb.fyi/ar-jig-shootout-5d-tactical-vs-80-percent-arms

      The lowest advertised price that we found on the Internet is from JSD Supply. Check out the jig here https://bit.ly/373D8aL

      Visit us at : 

      http://www.trb.fyi
      http://www.facebook.com/TheRogueBanshee/
      http://www.twitter.com/TheRogueBanshee
      http://www.patreon.com/TheRogueBanshee  

      Video Index:

      What comes with the jig kit - 0:24
      Step 1: Installing the buffer adapter - 2:13
      Step 2: Mounting the lower to the jig - 3:16
      Step 3: Installing the side plates - 5:06
      Step 4: Installing the drill guide - 6:20
      Step 5: Router setup - 7:02
      Step 6: Drilling the pilot hole - 9:07
      Step 7: Milling the lower - 10:31
      Step 8: Drilling the safety, hammer and trigger pin holes - 13:58
      Step 9: Removing the receiver from the jig - 14:59
      Does it work - 15:48

      Visit our article titled 5D Tactical - Tools used in our video to learn more about the tools we used in this video. https://trb.fyi/5d-tactical-tools-used-in-our-video/


      If you like the work that we do at The Rogue Banshee, please consider supporting us for free by clicking on our affiliate links before purchasing gear, parts and tools, donating to us using the links to the right of this article or becoming a patron on Patreon. Your support helps us produce content as we do not allow vendors or manufacturers to pay us for content. 

      Also, don't forget to share our content on your favorite social media platform by clicking the sharing buttons below.

    • 00:05:24

      This is our 1911 slide disassembly and reassembly video. This video shows you how to disassemble and  reassemble the 1911 slide.

      Consider supporting us but using our affiliate links on www.trb.fyi or by becoming a Patron on Patreon (http://www.patreon.com/TheRogueBanshee) so that we can continue providing high quality content.  

      Visit our channel for more content on the Beretta Series of Firearms and remember to subscribe while you are there. 

      For the tools that we used on the 1911 videos visit  http://trb.fyi/tools-used-in-the-1911-series-70-videos/ and visit our troubleshooting guides at http://trb.fyi/troubleshooting/ 


      Visit us at : 
       
      http://www.trb.fyi  
      http://www.facebook.com/TheRogueBanshee/  
      http://www.twitter.com/TheRogueBanshee  
      http://www.patreon.com/TheRogueBanshee  

      Video Index:
      Removing the Firing Pin Stop and Firing Pin - 0:41
      Removing the Extractor - 1:43
      Installing the Extractor - 2:20
      Installing the Firing Pin Spring - 3:10
      Installing the Firing Pin and Firing Pin Stop - 3:43

    • 00:10:48
      1911 Series 70 Frame Disassembly
      188 Views . 06 Nov 2019

      This video will walk you through Disassembling a 1911 Series 70 Frame. 

      Consider supporting us but using our affiliate links on www.trb.fyi or by becoming a Patron on Patreon (http://www.patreon.com/TheRogueBanshee) so that we can continue providing high quality content.  

      Visit our channel for more content on the Beretta Series of Firearms and remember to subscribe while you are there. 

      For the tools that we used on the 1911 videos visit  http://trb.fyi/tools-used-in-the-1911-series-70-videos/ and visit our troubleshooting guides at http://trb.fyi/troubleshooting/ 

      Visit us at : 
       
      http://www.trb.fyi  
      http://www.facebook.com/TheRogueBanshee/  
      http://www.twitter.com/TheRogueBanshee  
      http://www.patreon.com/TheRogueBanshee  

      Video Index: 
      Removing the Grips - 0:41
      Removing the Thumb Safety - 1:55
      Removing the Safety and Slide Stop Plungers and Spring - 2:46
      Removing the Grip Safety - 3:49
      Removing the Mainspring Housing - 4:19
      Removing the Sear Spring - 6:27
      Removing the Hammer, Sear and Disconnector - 6:51
      Removing the Magazine Catch and Trigger - 8:17

    • 00:06:50
      Glock Field Strip
      170 Views . 06 Nov 2019

      Our Glock Field Strip Video will show you how to disassemble your Glock for cleaning and routine maintenance. We have also produced a Glock Slide Disassembly and Reassembly Video, Glock Frame Disassembly Video as well as a Glock Frame Reassembly Video for you to learn more about the Glock pistols. 

      Our Glock video series should cover most models of Glock including:

      9mm     .40     10mm.    .45 Auto     .45 G.A.P.     .380 Auto     .357 Sig
      G17      G22     G20         G21             G37               G42                G31
      G19      G23     G29         G30             G38                                      G32
      G26      G27     G40         G36             G39                                      G33
      G34      G35                     G41
      G43

      If you find our videos helpful please consider supporting us for free by using our affiliate banners and links on www.trb.fyi or by donating by becoming a Patron on Patreon http://www.patreon.com/TheRogueBanshee. Your support helps us continue providing high-quality content.  

      Visit our channel for more content on Glock firearms and remember to subscribe while you are there. 

      If you want to learn more about the tools used in the Glock Videos visit https://trb.fyi/tools-used-in-the-glock-videos If you need more information about troubleshooting visit our Glock Troubleshooting Guide at https://trb.fyi/glock-troubleshooting-guide/

      Visit us at : 
       
      http://www.trb.fyi  
      http://www.facebook.com/TheRogueBanshee/  
      http://www.twitter.com/TheRogueBanshee  
      http://www.patreon.com/TheRogueBanshee  

      Video index:

      History - 0:41
      Checking for an unloaded firearm - 1:38
      Removing the Slide - 2:32
      Removing the Barrel - 3:25
      Installing the Barrel - 4:34
      Installing the Slide - 5:49

    • 00:07:53
      Glock Frame Disassembly
      176 Views . 06 Nov 2019

      Our Glock Frame Disassembly Video will show you how to disassemble your Glock frame down to its individual components. Watch our Glock Frame Reassembly Video to learn how to put it back together again. Also, check out our Glock Slide Disassembly and Reassembly Video.

      Our Glock video series should cover most models of Glock including:

      9mm     .40     10mm.    .45 Auto     .45 G.A.P.     .380 Auto     .357 Sig
      G17      G22     G20         G21             G37               G42                G31
      G19      G23     G29         G30             G38                                      G32
      G26      G27     G40         G36             G39                                      G33
      G34      G35                     G41
      G43

      If you find our videos helpful please consider supporting us for free by using our affiliate banners and links on www.trb.fyi or by donating by becoming a Patron on Patreon http://www.patreon.com/TheRogueBanshee. Your support helps us continue providing high-quality content.  

      Visit our channel for more content on Glock firearms and remember to subscribe while you are there. 

      If you want to learn more about the tools used in the Glock Videos visit https://trb.fyi/tools-used-in-the-glock-videos If you need more information about troubleshooting visit our Glock Troubleshooting Guide at https://trb.fyi/glock-troubleshooting-guide/

      Visit us at : 
       
      http://www.trb.fyi  
      http://www.facebook.com/TheRogueBanshee/  
      http://www.twitter.com/TheRogueBanshee  
      http://www.patreon.com/TheRogueBanshee  

      Video index:
      Removing the Pins - 0:40
      Removing the Slide Stop - 2:15
      Removing the Locking Block - 2:33
      Removing the Trigger Assembly - 3:19
      Disassembling the Trigger Assembly - 3:55
      Removing the Slide Lock and Spring - 5:19
      Removing the Magazine Catch and Spring - 6:05

      Glock Frame Reassembly Video

      Our Glock Frame Reassembly Video will show you how to reassemble your Glock frame from its individual components. Watch our Glock Frame Reassembly Video to learn how to put it back together again and check out our Glock Slide Disassembly and Reassembly Video as well. 

      Our Glock video series should cover most models of Glock including:

      9mm     .40     10mm.    .45 Auto     .45 G.A.P.     .380 Auto     .357 Sig
      G17      G22     G20         G21             G37               G42                G31
      G19      G23     G29         G30             G38                                      G32
      G26      G27     G40         G36             G39                                      G33
      G34      G35                     G41
      G43

      If you find our videos helpful please consider supporting us for free by using our affiliate banners and links on www.trb.fyi or by donating by becoming a Patron on Patreon http://www.patreon.com/TheRogueBanshee. Your support helps us continue providing high-quality content.  

      Visit our channel for more content on Glock firearms and remember to subscribe while you are there. 

      If you want to learn more about the tools used in the Glock Videos visit https://trb.fyi/tools-used-in-the-glock-videos If you need more information about troubleshooting visit our Glock Troubleshooting Guide at https://trb.fyi/glock-troubleshooting-guide/

      Visit us at : 
       
      http://www.trb.fyi  
      http://www.facebook.com/TheRogueBanshee/  
      http://www.twitter.com/TheRogueBanshee  
      http://www.patreon.com/TheRogueBanshee  

      Video index:
      Installing the Magazine Catch and Spring - 0:40
      Assembling the Trigger Assembly - 2:23
      Installing the Trigger Assembly - 4:14
      Installing the Slide Stop - 5:47
      Installing the Locking Block - 7:17
      Installing the Slide Stop - 8:51

    • 00:11:38
      Glock Slide Disassembly and Reassembly
      187 Views . 06 Nov 2019

      Our Glock Slide Disassembly and Reassembly Video will show you how to disassemble your Glock slide down to its individual components. After disassembly, we show you how to reassemble the slide. Also don’t forget to check out our Glock Frame Disassembly Video, Glock Frame Reassembly Video as well as our Glock Field Strip Video to learn more about the Glock pistols.

      Our Glock video series should cover most models of Glock including:

      9mm     .40     10mm.    .45 Auto     .45 G.A.P.     .380 Auto     .357 Sig
      G17      G22     G20         G21             G37               G42                G31
      G19      G23     G29         G30             G38                                      G32
      G26      G27     G40         G36             G39                                      G33
      G34      G35                     G41
      G43

      If you find our videos helpful please consider supporting us for free by using our affiliate banners and links on www.trb.fyi or by donating by becoming a Patron on Patreon http://www.patreon.com/TheRogueBanshee. Your support helps us continue providing high-quality content.  

      Visit our channel for more content on Glock firearms and remember to subscribe while you are there. 

      If you want to learn more about the tools used in the Glock Videos visit https://trb.fyi/tools-used-in-the-glock-videos If you need more information about troubleshooting visit our Glock Troubleshooting Guide at https://trb.fyi/glock-troubleshooting-guide/

      Visit us at : 
       
      http://www.trb.fyi  
      http://www.facebook.com/TheRogueBanshee/  
      http://www.twitter.com/TheRogueBanshee  
      http://www.patreon.com/TheRogueBanshee  

      Video index:
      Removing the Slide Cover Plate - 0:41
      Removing the Firing Pin Assembly - 1:47
      Removing the Extractor - 3:34
      Removing the Firing Pin Safety - 5:06
      Assembling and installing the Firing Pin Safety - 5:49
      Installing the Extractor - 7:02
      Assembling and installing the Extractor Depressor Assembly - 7:40
      Assembling and installing the Firing Pin Assembly - 8:38
      Installing the Slide Cover Plate - 10:27

    • 00:07:38
      CZ 75B / EAA Witness - Field Strip
      203 Views . 06 Nov 2019

      Our CZ 75B and Clone Field Strip Video will walk you through Field Stripping a CZ 75B and its clones like the EAA Witness. Field Stripping is an essential skill for the firearm owner to have since it is the basis for cleaning and doing basic maintenance.  

      This Video features an EAA Witness pistol which is a clone of the CZ 75B. There may be slight differences in this pistol to the CZ 75B however, the procedures should be extremely similar. 

      If you find our videos helpful please consider supporting us for free by using our affiliate banners and links on www.trb.fyi or by donating by becoming a Patron on Patreon http://www.patreon.com/TheRogueBanshee. Your support helps us continue providing high-quality content.  

      Visit our channel for more content on the CZ 75B and its clones and remember to subscribe while you are there. 

      For an article on the tools that we used on the CZ 75B visit  http://trb.fyi/cz-75b-and-clone-field-strip-video and visit our troubleshooting guides at http://trb.fyi/troubleshooting/ while you are at our page. 

      Visit us at : 
       
      http://www.trb.fyi  
      http://www.facebook.com/TheRogueBanshee/  
      http://www.twitter.com/TheRogueBanshee  
      http://www.patreon.com/TheRogueBanshee  

       
      Video Index: 
      History - 0:29
      Checking for an unloaded firearm - 1:29
      Removing the Slide from the Frame - 2:00
      Removing the Recoil Spring from the Slide - 3:11
      Removing the Barrel from the Slide - 3:57
      Installing the Barrel into the Slide - 4:24
      Installing the Recoil Spring into the Slide - 4:53
      Installing the Slide onto the Frame - 5:50

    • 00:08:31

      Our CZ 75B and Clone Slide Disassembly and Reassembly Video will show you how to disassemble a slide down to its individual components and then reassemble it. 

      This Video features an EAA Witness pistol which is a clone of the CZ 75B. There may be slight differences in this pistol to the CZ 75B however, the procedures should be extremely similar. 

      If you find our videos helpful please consider supporting us for free by using our affiliate banners and links on www.trb.fyi or by donating by becoming a Patron on Patreon http://www.patreon.com/TheRogueBanshee. Your support helps us continue providing high-quality content.  

      Visit our channel for more content on the CZ 75B and its clones and remember to subscribe while you are there. 

      For an article on the tools that we used on the CZ 75B visit  http://trb.fyi/cz-75b-and-clone-field-strip-video and visit our troubleshooting guides at http://trb.fyi/troubleshooting/ while you are at our page. 

      Visit us at : 
       
      http://www.trb.fyi  
      http://www.facebook.com/TheRogueBanshee/  
      http://www.twitter.com/TheRogueBanshee  
      http://www.patreon.com/TheRogueBanshee  

       
      Video Index: 
      Removing the Firing Pin - 0:36
      Removing the Extractor - 2:26
      Installing the Extractor - 3:47
      Installing the Firing Pin - 6:08

    • 00:10:58

      Our CZ 75B and Clone Frame Disassembly Video will walk you through disassembling the frame of a CZ 75B and its clones like the EAA Witness. 
       
      This Video features an EAA Witness pistol which is a clone of the CZ 75B. There may be slight differences in this pistol to the CZ 75B however, the procedures should be extremely similar. 
       
      If you find our videos helpful please consider supporting us for free by using our affiliate banners and links on www.trb.fyi or by donating by becoming a Patron on Patreon http://www.patreon.com/TheRogueBanshee. Your support helps us continue providing high-quality content.  

      Visit our channel for more content on CZ firearms and remember to subscribe while you are there. Also, make sure to visit the Full30 Forum located at https://forum.full30.com/ to interact with other gun owners in some awesome conversations about all aspects of our sport. While you are there stop by my profile (https://forum.full30.com/u/TheRogueBanshee/) to see what threads that we are active in.
       
      To learn more about the tools that we used on the CZ 75B and Clone Field Strip Videos visit http://trb.fyi/tools-used-in-the-cz-75-and-cz-75-clone-videos/ and visit our troubleshooting guides at http://trb.fyi/troubleshooting/ 

      Visit us at :
       
      http://www.trb.fyi  
      http://www.facebook.com/TheRogueBanshee/  
      http://www.twitter.com/TheRogueBanshee  
      http://www.patreon.com/TheRogueBanshee  
       

      Video Index: 
      Removing the Trigger Spring - 0:36
      Removing the Safety - 1:53
      Removing the Sear Housing - 3:19
      Disassembling the Sear Housing - 3:40
      Removing the Trigger - 5:03
      Removing the Hammer - 5:44
      Removing the Magazine Catch - 7:07
      Removing the Slide Stop Spring - 8:42

    • 00:06:39
      P320 80% Range Testing Video
      208 Views . 06 Nov 2019

      Our P320 80% Range Testing Video will show you the first shots of the build as well as some follow up work we completed. 

      If you find our videos helpful please consider supporting us for free by using our affiliate banners and links on www.trb.fyi or by donating by becoming a Patron on Patreon http://www.patreon.com/TheRogueBanshee. Your support helps us continue providing high-quality content.  

      Visit our channel for more content on Sig Sauer firearms and remember to subscribe while you are there. 

      For the tools that we used on the Sig P320 videos visit http://trb.fyi/tools-used-in-the-p320-disassembly-and-reassembly-videos and visit our troubleshooting guides at http://trb.fyi/troubleshooting/ while you are at our page. 

      Visit us at : 
       
      http://www.trb.fyi  
      http://www.facebook.com/TheRogueBanshee/  
      http://www.twitter.com/TheRogueBanshee  
      http://www.patreon.com/TheRogueBanshee  

       
      Video Index: 
      First Shots – 0:40
      Load Three and Test Fire – 1:05
      Load More and Test Fire  – 1:15
      Change Caliber to .40 and Test Fire – 1:46
      Post Firing Inspection of the FCU - 2:12
      Cleaning sharp edges and polishing the FCU – 4:07

    • 00:19:57
      The Reckoning by CrossBreed Holsters
      199 Views . 06 Nov 2019

      Our The Reckoning by CrossBreed Holsters video will show you the opening of the package that we received from CrossBreed. Then walk you through adding tension to the trigger guard as well as changing the holster from inside the waistband (IWB) to outside the waistband (OWB) and then back again. Finally, we will explore the possibility of using this holster with the subcompact configuration of a P320 even though this holster was designed for the compact or carry configuration. 

      This holster was provided to us for free by CrossBreed however there are no opinions in this video. To see what we think about this holster visit www.trb.fyi/adventures-with-the-reckoning-holster-by-crossbreed

      If you find our videos helpful please consider supporting us for free by using our affiliate banners and links on www.trb.fyi or by donating by becoming a Patron on Patreon http://www.patreon.com/TheRogueBanshee. Your support helps us continue providing high-quality content.  

      Visit our channel for more content on Sig Sauer firearms and remember to subscribe while you are there. 

      Visit us at : 
       
      http://www.trb.fyi  
      http://www.facebook.com/TheRogueBanshee/  
      http://www.twitter.com/TheRogueBanshee  
      http://www.patreon.com/TheRogueBanshee  

       
      Video Index: 
      The Opening - 0:40
      Checking for an unloaded firearm - 2:09
      Does it fit? - 2:28
      Adding tension to the trigger guard - 2:49
      Changing from IWB to OWB - 3:58
      Changing from OWB to IWB - 11:24
      Does it work with the subcompact P320 - 18:11

    • 00:06:06
      AR 15 Field Strip
      166 Views . 06 Nov 2019

      Our AR 15 Field Strip Video will show you how to Field Strip for cleaning and routine maintenance. Field stripping an AR is essentially opening up the rifle and removing the bolt carrier group. In our AR 15 upper disassembly video we will disassemble the bolt carrier group. Later in our AR 15 upper reassembly video we will reassembly the bolt carrier group. 

      This video features an AR 15 rifle however, this process will also work for the AR 10 rifle as well. 

      If you find our videos helpful please consider supporting us for free by using our affiliate banners and links on www.trb.fyi or by donating by becoming a Patron on Patreon http://www.patreon.com/TheRogueBanshee. Your support helps us continue providing high-quality content.  

      Visit our channel for more content on AR type firearms and remember to subscribe while you are there. 

      If you want to learn more about the tools used in the AR 15  Videos visit http://trb.fyi/tools-used-in-the-ar-15-videos/ If you need more information about troubleshooting visit our AR Troubleshooting Guide at http://trb.fyi/ar-15-troubleshooting-guide/

      Visit us at : 
       
      http://www.trb.fyi  
      http://www.facebook.com/TheRogueBanshee/  
      http://www.twitter.com/TheRogueBanshee  
      http://www.patreon.com/TheRogueBanshee  

      Video index:

      History - 0:35
      Checking for an unloaded firearm - 1:25
      Removing the bolt carrier group - 3:00
      Installing the Bolt carrier group - 4:02

  • I am a part-time FFL (I still work my day job), Firearms enthusiast and have been shooting since I was 10 years old. This channel was created as an outlet for showing various firearms related content including how I take down and put together various firearms

    More information can be found at my blog located at http://www.trb.fyi. I can also be found on the following platforms:

    http://www.patreon.com/TheRogueBanshee

    https://www.facebook.com/TheRogueBanshee/

  • Playlists  

  • Payment Videos

    Revenue

    $ 0

  • Live Videos  

    No videos found....!


Support GunTube,
Help Us Grow GunTube!

BrownellsCabela's
GunMag WarehouseNatchez Shooters Supplies
Palmetto State ArmorySportsman's Guide